Marine distillate fuels

Our Marine Distillate Fuels meet the terms with all globally known standards. For the local exceptions

DMX

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max - 3675 or 12185
Viscosity at 40°C mm²/s 2 min 1.4 3104
Viscosity at 40°C mm²/s 2 max 5.5 3104
Flash Point °C min 43 2719
Pour Point (upper) 3        
Winter Quality °C max - 3016
Summer Quality °C max - 3016
Cloud Point °C max -16 4 3015
Sulfur 5 % (m/m) max 1.00 8754 or 14596
Cetane Index - min 45 4264
Carbon residue on 10% (V/V) destillation bottoms % (m/m) max 0.30 10370
Carbon residue % (m/m) max - 10370
Ash % (m/m) max 0.01 6245
Appearance 6 - - Clear + bright
Total sediment, existent % (m/m) max - 10307-1
Water % (V/V) max - 3733
Vanadium mg/kg max - 14597, IP 501 or IP 470
Aluminium plus silicon mg/kg max - 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max - IP 501 or IP 470
Phosphorus mg/kg max - IP 501 or IP 500
Calcium mg/kg max - IP 501 or IP 470

DMA

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 890.0 3675 or 12185
Viscosity at 40°C mm²/s 2 min 1.5 3104
Viscosity at 40°C mm²/s 2 max 6.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 3        
Winter Quality °C max -6 3016
Summer Quality °C max 0 3016
Cloud Point °C max - 3015
Sulfur 5 % (m/m) max 1.5 8754 or 14596
Cetane Index - min 40 4264
Carbon residue on 10% (V/V) destillation bottoms % (m/m) max 0.30 10370
Carbon residue % (m/m) max - 10370
Ash % (m/m) max 0.01 6245
Appearance 6 - - Clear + bright
Total sediment, existent % (m/m) max - 10307-1
Water % (V/V) max - 3733
Vanadium mg/kg max - 14597, IP 501 or IP 470
Aluminium plus silicon mg/kg max - 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max - IP 501 or IP 470
Phosphorus mg/kg max - IP 501 or IP 500
Calcium mg/kg max - IP 501 or IP 470

DMB

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 900.0 3675 or 12185
Viscosity at 40°C mm²/s 2 min - 3104
Viscosity at 40°C mm²/s 2 max 11.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 3        
Winter Quality °C max 0 3016
Summer Quality °C max 6 3016
Cloud Point °C max - 3015
Sulfur 5 % (m/m) max 2.00 8754 or 14596
Cetane Index - min 35 4264
Carbon residue on 10% (V/V) destillation bottoms % (m/m) max - 10370
Carbon residue % (m/m) max 0.30 10370
Ash % (m/m) max 0.01 6245
Appearance 6 - - 6
Total sediment, existent % (m/m) max 0.10 6 10307-1
Water % (V/V) max 0.3 6 3733
Vanadium mg/kg max - 14597, IP 501 or IP 470
Aluminium plus silicon mg/kg max - 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max - IP 501 or IP 470
Phosphorus mg/kg max - IP 501 or IP 500
Calcium mg/kg max - IP 501 or IP 470

DMC1

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 920.0 3675 or 12185
Viscosity at 40°C mm²/s 2 min - 3104
Viscosity at 40°C mm²/s 2 max 14.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 3        
Winter Quality °C max 0 3016
Summer Quality °C max 6 3016
Cloud Point °C max - 3015
Sulfur 5 % (m/m) max 2.00 8754 or 14596
Cetane Index - min - 4264
Carbon residue on 10% (V/V) destillation bottoms % (m/m) max - 10370
Carbon residue % (m/m) max 2.50 10370
Ash % (m/m) max 0.05 6245
Appearance 6 - -
Total sediment, existent % (m/m) max 0.10 10307-1
Water % (V/V) max 0.3 3733
Vanadium mg/kg max 100 14597, IP 501 or IP 470
Aluminium plus silicon mg/kg max 25 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 157 IP 501 or IP 470
Phosphorus mg/kg max 157 IP 501 or IP 500
Calcium mg/kg max 307 IP 501 or IP 470

  1. Note that although predominantly consisting of distillate fuel, the residual oil proportion can be significant.
  2. 1 mm²/s = 1 cSt
  3. Purchasers should ensure that this pour point is suitable for the equipment on board, especially if the vessel operates in both the northern and southern hemispheres.
  4. This fuel is suitable for use without heating at ambient temperatures down to - 16 °C.
  5. A sulfur limit of 1.5 % (m/m) will apply in SOx emission control areas designated by the International Maritime Organization, when its relevant protocol enters into force. There may be local variations, for example the EU requires that sulphur content of certain distillate grades be limited to 0.2 % (m/m) in certain applications. See 0.3 and reference [7].
  6. If the sample is clear and with no visible sediment or water, the total sediment existent and water tests shall not be required. See 7.4 and 7.5.
  7. A fuel shall be considered to be free of used lubricating oils (ULOs) if one or more of the elements zinc, phosphorus and calcium are below or at the specified limits. All three elements shall exceed the same limits before a fuel shall be deemed to contain ULOs.
 
 
Contact : 14 Itapeju Street,Off Wharf Road, Apapa, Lagos. NIGERIA. +234-01-761-7287,+234-01-580 4789, 234-802-312-7338, 234-805-514-8152