Marine residual fuels

Our Marine Residual Fuels comply with all internationally recognized standards, inter alia ISO Fuel Standard 8217. For the local exceptions

RMA 30

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 960.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 30.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 0 3016
Summer Quality °C max 6 3016
Carbon residue % (m/m) max 10 10370
Ash % (m/m) max 0.10 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 3.50 8754 or 14596
Vanadium mg/kg max 150 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMB 30

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 975.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 30.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 24 3016
Summer Quality °C max 24 3016
Carbon residue % (m/m) max 10 10370
Ash % (m/m) max 0.10 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 3.50 8754 or 14596
Vanadium mg/kg max 150 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMD 80

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 980.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 80.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 14 10370
Ash % (m/m) max 0.10 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.00 8754 or 14596
Vanadium mg/kg max 350 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RME 180

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 991.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 180.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 15 10370
Ash % (m/m) max 0.10 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 200 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMF 180

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 991.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 180.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 20 10370
Ash % (m/m) max 0.15 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 500 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMG 380

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 991.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 380.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 18 10370
Ash % (m/m) max 0.15 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 300 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMH 380

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 991.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 380.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 22 10370
Ash % (m/m) max 0.15 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 600 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMK 380

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 1010.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 380.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 22 10370
Ash % (m/m) max 0.15 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 600 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMH 700

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 991.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 700.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 22 10370
Ash % (m/m) max 0.15 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 600 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

RMK 700

Characteristic Units Limits   ISO
Density at 15°C kg/m³ max 1010.0 3675 or 12185
Kinematic Viscosity at 50°C mm²/s 1 max 700.0 3104
Flash Point °C min 60 2719
Pour Point (upper) 2        
Winter Quality °C max 30 3016
Summer Quality °C max 30 3016
Carbon residue % (m/m) max 22 10370
Ash % (m/m) max 0.15 6245
Water % (V/V) max 0.5 3733
Sulfur 3 % (m/m) max 4.50 8754 or 14596
Vanadium mg/kg max 600 14597, IP 501 or IP 470
Total sediment potential % (m/m) max 0.10 10307-2
Aluminium plus silicon mg/kg max 80 10478, IP 501 or IP 470
Used lubricating oil (ULO)       The fuel shall be free of ULO
Zinc mg/kg max 154 IP 501 or IP 470
Phosphorus mg/kg max 154 IP 501 or IP 500
Calcium mg/kg max 304 IP 501 or IP 470

 

  1. Annex C gives a brief viscosity/temperature table, for information purposes only.
    1 mm²/s = 1 cSt
  2. Purchasers should ensure that this pour point is suitable for the equipmenton board, especially if the vessel operates in both the northern and southern hemispheres.
  3. A sulfur limit of 1,5 % (m/m) will apply in SOx emission control areas designated by the International Maritime Organization, when its relevant protocol comes into force. There may be local variations.
  4. A fuel shall be considered to be free of used labricating oils (ULO’s) if one or more of the elements zinc, phosphorus and calcium are below or at the specified limits. All three elements shall exceed the same limits before a fuel shall be deemed to contain ULOs.

 
 
 
Contact : 14 Itapeju Street,Off Wharf Road, Apapa, Lagos. NIGERIA. +234-01-761-7287,+234-01-580 4789, 234-802-312-7338, 234-805-514-8152